Part Number Hot Search : 
M471B5 FQD24N08 CPC1706Y UPD17231 1418B10 C74LVX FQD24N08 00300210
Product Description
Full Text Search
 

To Download SPX385AS-12 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 (R)
SPX385-1.2
Micropower Voltage Reference
FEATURES Low Output Voltage ................................ 1.235V Dynamic Impedance...............................1 max Low Temperature Coefficient........30ppm/C (typ) 8 ANODE Operating Current ........................ 10A to 20mA N/C 1 SPX385-1.2 Extended Temperature Range .. -40C to +85C N/C 2 7 N/C Initial Tolerance..................................1% and 2% 6 N/C N/C 3 8 Pin nSOIC Pin Compatible with LM185/285/385, 1.23V 5 N/C APPLICATIONS CATHODE 4 Portable Meter Reference Portable Test Instruments Now Available in Lead Free Packaging Battery Operated Systems Panel Meters DESCRIPTION The SPX385-1.2 is a micropower 2-terminal band-gap voltage reference with a very wide operating current range from 10A to 20mA that provides a stable voltage. The high stability of this device is primarily the result of the low temperature coefficient Thin Film Resistor process and Laser Trimming of the output voltage at the wafer level. The SPX385-1.2 is available in a TO-92, SOIC-8 and SOT-89 package with an operating temperature range of -40C to 85C. A 2.5 and 5.0 volt devices are also available - SPX385-2.5, SPX385-5.0. BLOCK DIAGRAM
Cathode (K)
+ 1.235V
Anode (A)
Figure 1: Block Diagram
Date: 5/25/04 SPX385-1.2 Micropower Voltage Reference (c) Copyright 2004 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
Reverse Current (IKA)) ................................................................. 30mA Forward Current (IAK) .................................................................. 10mA Operating Temperature Range (TA) ................................. -40 to +85C Continuos Power Dissipation at 25C (PD) TO-92 ................................................................... 775mW SOIC-8 ................................................................. 750mW SOT-89 ............................................................... 1000mW Junction Temperature (TJ) .......................................................... 150C Storage Temperature (TSTG) ............................................ - 65 to 150C Lead Temperature (Soldering 10 sec.), TL .................................. 300C Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
TYPICAL THERMAL RESISTANCES
PACKAGE TO-92 SOIC-8 SOT-89 0JA 160C/W 175C/W 110C/W 0JA 80C/W 45C/W 8C/W TYPICAL DERATING 6.3 mW/C 5.7mW/C 9.1mW/C
ELECTRICAL CHARACTERISTICS
IIN = 100A, TA = 25C, unless otherwise specified. PARAMETER Reference Voltage Dynamic Output Impedance Reference Voltage Change with IR Temperature Coefficient Minimum Operating Current Output Wideband Noise Operating Temperature 10Hz f 10kHz -40 F = 20Hz IR = 100A 10A IR 20mA Note 1 CONDITIONS SPX385A-1.2 MIN. TYP. MAX 1.223 1.235 0.6 10 30 8 60 +85 -40 1.247 1.0 20 50 10 SPX385-1.2 MIN. TYP. MAX. 1.205 1.235 0.6 10 30 8 60 +85 1.260 1.0 20 50 10 UNIT V mV ppm/C A Vrms C
Note 1. Three-point measurement guarantees the error band over the specified temperature range.
*
ppm
0
CALCULATING AVERAGE TEMPERATURE COEFFICIENT (TC)
%
0
mV
0
VKA
TC in mV/C =
T
VKA (mV) TA
-5 5000 0.5
TC in % /C =
(
VKA VKA at 25C TA
)
x 100
0
15
30
45
60
75
90
105
TC in ppm/C =
(
VKA VKA at 25C TA
)
x 106
Junction Temperature (C)
0.033 mV/C 0.0027 %/C 27 ppm/C
Figure 2. VREF vs. Temperature
Date: 5/25/04 SPX385-1.2 Micropower Voltage Reference (c) Copyright 2004 Sipex Corporation
2
TYPICAL PERFORMANCE CHARACTERISTICS
30
Temperature Range: 0C to 85C
25
VIN
VKA = VREF
IK - Cathode Current (mA)
20
15
10
5
IK
0
-5
-10
-15
-20 -2 -1 0 1 1.23 2 3
VKA - Cathode Voltage (V)
Figure 3. Test Circuit for VKA=VREF
Figure 4. High Current Operating Characteristics
18
1.250
IK = 10mA
1.245
Temperature Range: 0C to 85C
1.240
12
VREF - Reference Voltage (V)
1.235
IK - Cathode Current (A)
1.230
85 C 6 25 C -0 C
1.225
1.200
0
1.150
1.100 -60 -30 0 30 60 90 120
-1.0
0 0.5
-0.5
1.0
1.5
TA - Ambient Temperature (C)
VKA - Cathode Voltage (V)
Figure 5. Reference Voltage vs. Ambient Temperature
SPX385-1.2
Figure 6. Low Current Operating Characteristics
* IOUT = 1.23V R2
* IOUT = 1.23V R2
30V
SPX385-1.2
R1 100k
C1 150pF
2
-
7 6
R1 100k
C1 150pF
2
-
7 6
LM312
3
LM312
3
+
4
+
4
IOUT* -1.5V to -27V -30V
R2
1.5V to 27V
IOUT*
R2
Figure 7a. Precision 1A to 1mA Current Sink
Date: 5/25/04
Figure 7b. Precision 1A to 1mA Current Source
(c) Copyright 2004 Sipex Corporation
SPX385-1.2 Micropower Voltage Reference
3
TYPICAL PERFORMANCE CHARACTERISTICS
9V
1.5V
3k 1.2V SPX385-1.2
500k
1.2V SPX385-1.2
Figure 8. Reference from 1.5V Battery
Figure 9. Micropower Reference from 9V Battery
IQ
VIN = 2.3V to 30V
VIN = 15V 1M 7 + 3 LM4250C 8 2
6 10V
LM334 4.3k OUT 1.2V SPX385-1.2
4 22M 150pF
3.5M
SPX385-1.2 500k
IQ 20A Standby Current
Figure 10. Wide Input Range Reference
Figure 11: Precision Micropower 10V Reference
Date: 5/25/04
SPX385-1.2 Micropower Voltage Reference
(c) Copyright 2004 Sipex Corporation
4
PACKAGE: 8 PIN NSOIC
D e
E/2 E1 E E1/2
SEE VIEW C
1 INDEX AREA (D/2 X E1/2) b
O1
TOP VIEW
L2 Seating Plane
O1
Gauge Plane
O
L L1
A
A2 SEATING PLANE A1
VIEW C
SIDE VIEW
8 Pin NSOIC
(JEDEC MS-012, AA - VARIATION)
DIMENSIONS Minimum/Maximum (mm)
WITH PLATING
b
COMMON HEIGHT DIMENSION
SYMBOL A A1 A2 b c D E E1 e L L1 L2 O O1
MIN NOM MAX 1.75 1.35 0.25 0.10 1.25 1.65 0.31 0.51 0.17 0.25 4.90 BSC 6.00 BSC 3.90 BSC 1.27 BSC 0.40 1.27 1.04 REF 0.25 BSC 0 8 5 15
c
BASE METAL
CONTACT AREA
8 PIN NSOIC
Date: 5/25/04
SPX385-1.2 Micropower Voltage Reference
(c) Copyright 2004 Sipex Corporation
5
PACKAGE: 3 PIN TO-92
L
e
e1
W
D
A
b
S1
3 PIN TO-92
CARSEM DWG # TLG920001
DIMENSIONS Minimum/Maximum (mm)
COMMON HEIGHT DIMENSION
SYMBOL A b E e e1 L R S1 W D
MIN NOM 4.32 0.36 3.30 2.41 1.14 12.70 2.16 1.14 0.41 4.45 4 -
MAX
4.95
R
0.51 3.94 2.67 1.40 15.49 2.41 1.52 0.56
4.95 6
E
(2x)
3 PIN TO-92
Date: 5/25/04
SPX385-1.2 Micropower Voltage Reference
(c) Copyright 2004 Sipex Corporation
6
PACKAGE: 3 PIN SOT-89
D
D1 3
O1.0
E H
5'(2x)
1 e
2
e1
C
3 PIN SOT-89 LINGSEN # PO-SOT-004 A b b1 C D D1 E e e1 H L Dimensions in (mm) MIN 1.40 0.36 0.41 0.38 4.40 1.40 2.40 1.45 2.90 3.94 0.80 NOM MAX 1.50 0.42 0.47 0.40 4.50 1.60 2.50 1.50 3.00 1.60 0.48 0.53 0.43 4.60 1.75 2.60 1.55 3.10 4.25 1.20
B'(2x)
RO.15
b
b1
b
3 PIN SOT-89
Date: 5/25/04
SPX385-1.2 Micropower Voltage Reference
(c) Copyright 2004 Sipex Corporation
7
PINOUTS
8-Pin Surface Mount (S)
N/C N/C N/C CATHODE 1 2 3 4 8 7 6 5 ANODE N/C 1 N/C N/C N/C ANODE CATHODE N/C ANODE CATHODE 2 3
SOT-89 (M1)
TO-92 (N)
1 2 3
Top View
Top View
Bottom View
ORDERING INFORMATION
Part Number SPX385AM1-1.2 SPX385AM1-1.2/TR SPX385AS-1.2 SPX385AS-1.2/TR SPX385AN-1.2 SPX385AN-1.2/TR SPX385M1-1.2 SPX385M1-1.2/TR SPX385S-1.2 SPX385S-1.2/TR SPX385N-1.2 SPX385N-1.2/TR Accuracy 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% Output Voltage 1.235V 1.235V 1.235V 1.235V 1.235V 1.235V 1.235V 1.235V 1.235V 1.235V 1.235V 1.235V Package Type 3-Pin SOT-89 3-Pin SOT-89 8-Pin NSOIC 8-Pin NSOIC 3-Pin TO-92 3-Pin TO-92 3-Pin SOT-89 3-Pin SOT-89 8-Pin NSOIC 8-Pin NSOIC 3-Pin TO-92 3-Pin TO-92
Available in lead free packaging. To order add "-L" suffix to part number. Example: SPX385S-1.2/TR = standard; SPX385S-L-1.2/TR = lead free /TR = Tape and Reel Pack quantity is 2000 for TO-92; 2500 for NSOIC and SOT-89.
Sipex Corporation
(R)
ANALOG EXCELLENCE
Headquarters and Sales Office: 233 Hillview Dr Milpitas, CA 95035 TEL: (408) 934-7500 FAX: (408) 935-7600
Sipex Corporation reserves the right to make changes to any products described herein. Sipex does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Date: 5/25/04
SPX385-1.2 Micropower Voltage Reference
(c) Copyright 2004 Sipex Corporation
8


▲Up To Search▲   

 
Price & Availability of SPX385AS-12

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X